If your device is based on Qualcomm CPU and you're searching for an easy way to flash the device's stock ROM, here ends your search.
Follow the instructions below to get you started.
1. Download and install Qualcomm driver from link above. While installing driver avoid using cable for successful installation.
2. After installation, connect Phone to PC using USB cable.
3. While connecting to PC, phone should be switched off and press volume up & down as boot key.
4. If it makes Qualcomm port, then driver has been successfully installed.
1. Download the QPST tool & driver.
2. Make sure your device is charged to at least 30%.
3. Run QFIL tool.
4. Click on Browse under the Programmer path to select MBN File.
MBN File Format:
5. As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.
6. Click on Load XML, select rawprogram_unsparse_without_qcn.xml and then choose Patch0.xml
Load XML comes with two option:
7. Switch off the device and connect it to PC by pressing Volume up & down key.
8. Click on Select Port and choose the port.
9. Click on Download to start flashing.
10. Disconnect device from USB cable once Finish Download appears.
That's all!
Follow the instructions below to get you started.
Prerequisites:
- Qualcomm QPST - Download
- Qualcomm Firmware - http://hibbydabby.blogspot.com /p/stockroms.html">download for your device
How to use QPST
To use QPST, some drivers need to be installed on your Computer. Follow the instructions below to install.1. Download and install Qualcomm driver from link above. While installing driver avoid using cable for successful installation.
2. After installation, connect Phone to PC using USB cable.
3. While connecting to PC, phone should be switched off and press volume up & down as boot key.
4. If it makes Qualcomm port, then driver has been successfully installed.
Flashing MBN firmware using QPST
Once driver installation is complete, follow the instructions below to flash the MBN firmware file to your Qualcomm device.1. Download the QPST tool & driver.
2. Make sure your device is charged to at least 30%.
3. Run QFIL tool.
4. Click on Browse under the Programmer path to select MBN File.
MBN File Format:
5. As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.
6. Click on Load XML, select rawprogram_unsparse_without_qcn.xml and then choose Patch0.xml
Load XML comes with two option:
- rawprogram_unsparse_without_qcn.xml : On choosing this file, data will not be lost.
- rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address.
7. Switch off the device and connect it to PC by pressing Volume up & down key.
8. Click on Select Port and choose the port.
9. Click on Download to start flashing.
10. Disconnect device from USB cable once Finish Download appears.
That's all!
47-AM-300x186.png 300w, https://www.laweekly.com/wp-content/uploads/2021/06/Screen-Shot-2021-06-18-at-11.03.47-AM-1024x634.png 1024w, https://www.laweekly. We want to touch on the top two recommendations we have for detox shampoo products so you know where to look. This section is all about covering which hair shampoos will work best for you — and why. Below are our top two picks for hair detox shampoo. When it comes down to passing a hair follicle test with little notice ahead of time, you have options. A nutra cleanse folli-clean shampoo, PassYourTest’s ultimate cleansing shampoo works to cleanse your hair of any unwanted toxins. Not only does it help you pass a drug test, but you also walk away with a healthier scalp and cleaner hair! It works in just 60 minutes to completely remove any drug residue and other pollutants from the hair follicles. Furthermore, included in the product kit is a cleansing coach to help make sure you pass. Likewise, you get a detailed shampoo instruction guide, so you don’t have to feel lost at any point of the way.
ReplyDelete